Hawken Plains Rifle, .58 caliber, 33-1/2" barrel, walnut, iron trim, percussion, used, marked Ingram

Home > Guns > Percussion guns > Percussion rifles

Hawken Plains Rifle,
.58 caliber, 33-1/2" barrel,
walnut, iron trim, percussion,
used, marked Ingram

Part Number:	AAW-129
Availability:

This Hawken Rifle with walnut stock is fitted with a 33-1/2" straight octagon barrel. The L&R Lock, barrel, and furniture are all finished to a dark brown with normal wear from handling and use. The barrel is stamped Ingram on the top flat. This Hawken only weighs 9.3 pounds, with a trigger reach of 13-5/8 to fit today's average size shooter.

The 33-1/2" barrel is secured to the stock with two wedge keys and a hooked breech. The .58 caliber barrel is cut rifled with eight lands and grooves with a slow twist for a patched round ball. The bore is mostly bright but does have some light pitting behind the first six inches of the muzzle. A semi buckhorn rear sight is dovetailed 11-1/2" ahead of the breech. The front sight is a steel blade with an integral base.

The black walnut stock is fitted with a late Hawken buttplate. All of the furniture is iron with the exception of the forend cap. The inletting on the long tang of the hooked breech is fair with some gaps visible. The hooked breech and wedge keys allow the barrel to be dismounted for easy cleaning. When the barrel is dismounted the barrel channel has a milled ramrod channel that is visible the length of the forearm. The forend is fitted with a nickel silver forend cap. The long square toe is fitted with a traditional Hawken toeplate. The ramrod entry pipe and a forward ramrod pipes secure the ramrod. The ramrod is 7/16" diameter ramrod with a single brass tip with no threads for loading or cleaning accessories. The cheek piece has a convex shape, and has a molded edge along the border.

The rifle is fitted with a L&R Hawken lock. Polished inside, the well tempered parts include a strong mainspring, stirrup link, and a fly detent to allow set triggers. The R.E.Davis Ron Long designed double lever double set triggers are positioned far to the rear. They will allow firing with the front trigger, but it must be pulled to the end of the travel. The set trigger work excellent due the rear placement. Adjust the screw between the two triggers, inboard to reduce set trigger release pressure, our outboard to require a stronger pressure. The set trigger can provide very light release, for accurate aimed shooting during pleasant weather.

This rifle is used with some handling marks. The bore does have some light pitting in the first few inches behind the muzzle. Fit is fair with some cosmetic gaps. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.570" round balls, pure lead, Hornady, per 50

Part Number:	BALL-570
Availability:
Price:	$12.99
Order Quantity:

.575" round balls, pure lead, hand cast, per 50

Part Number:	BALL-575-X
Availability:
Price:	$17.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Ball puller, steel screw, .58 caliber brass collar, 10-32 thread

Part Number:	BP-58-10
Availability:
Price:	$4.29
Order Quantity:

Bore brush, bronze, for .58 caliber, 10-32 thread

Part Number:	BRUSH-58-10
Availability:
Price:	$4.29
Order Quantity:

Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash

Part Number:	CAPPER-P
Availability:
Price:	$12.59
Order Quantity:

Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center

Part Number:	FLUSH-RST
Availability:
Price:	$4.99
Order Quantity:

Fouling Scraper, flat face, brass, .58 caliber, 10-32 thread

Part Number:	FS-58-10
Availability:
Price:	$4.79
Order Quantity:

Powder Horn, large, 11 to 14", with antique patina finish

Part Number:	HORN-A-L
Availability:
Price:	$74.50

Jag, jagged cleaning tip, brass, .58 caliber, 7/16" rod, 10-32 thread

Part Number:	JS-58-7-10
Availability:
Price:	$5.09
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59
Order Quantity:

Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry

Part Number:	OX-18-50-D
Availability:
Price:	$5.29
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread

Part Number:	RAMROD-7-10-B
Availability:
Price:	$19.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RST-I
Availability:
Price:	$4.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Percussion guns > Percussion rifles