Our 3/32" steel dowel pins are hardened to Rc 65, ideal for pinning barrel lugs, triggerguards, ramrod pipes, trigger pivot pins and other parts. Dowel pins measure .0937" in diameter, 1-1/2" long with neatly chamfered ends.
Old time gunmakers used pins whenever possible to avoid making screws. Pins are the correct traditional method. Nail shanks are far too soft, with no spring temper and never the exact diameter you need.
Caution: Drilling tiny 1/16" pin holes can cause problems. To our amazement, this tiny size is often recommended in gunmaking books. Small pins are hard to buy, hard to use, and easily bent. Broken drill bits (especially when breaking through the lug), bent drill bits, misaligned holes, and drill run-out are all common problems with tiny 1/16" pins. Our best quality 3/32" steel dowel pins solve all these problems.
We recommend a few #Drill-3/32 drill bits to insure easy installation and a perfect fit.
