Lancaster County makers were influenced by this master gunmaker. This trigger has a wide-faced curled trigger in early longrifle fashion. The trigger casting is .082" thick, and the plate has a .085" wide by 1" slot, allowing instant assembly with little or no filing. We recommend using a smooth screw as a pivot pin. The 0.18" thick front will accept a tang screw. Use a wood screw at the rear, if desired.
Malleable wax cast steel, you may bend the trigger plate to fit the profile of your stock, without fear of breakage.
Trigger and trigger plate sold separately. Plate is 3.74" long by .38" wide. Thickness .11" and .18" at the front.
