This flint knapping hammer has a hand forged iron handle with a brass hammer head, for sharpening gun flints instantly.
Overall length is about 4-3/4". Tie a leather lace or lanyard to the tail, to prevent it from becoming lost.
Made for flint lock shooters, this hammer will sharpen the flint in your lock, instantly.
NEVER sharpen the flint on a loaded gun!
Some flints can be re-sharpened 1 to 10 times, after every 20 to 30 shots.
Place the hammer at half-cock, and gently strike the front edge of the flint, square-on. This straight-on blow chips the upper and lower edges of the front edge, revealing a sharper edge.
When the top jaw screw comes close to the frizzen face, your flint is too short for this gun. Use it in a smaller flint lock (pistol lock) if it is still sharp.
Adobe Reader required to view the files below.
page_376.pdf
Last updated:4/25/2012
(115 KB)
| | |
|
The Art of Flint Knapping,
by D.C. Waldorf
|
|
|
The Art of Flint Knapping
Video Companion
DVD video
with D.C. Waldorf
|
|
|
English gun flint, 5/8 x 3/4", small Siler, L&R Bailes, CVA, all Thompson Center flintlocks, Lyman Great Plains & Trade Rifles, Pedersoli LePage pistol. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
|
|
|
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
|
|
|
Best from Story in Stone Poster, stone point chart
|
|