Cutler's Rivet, brass, single, one male and one female part. Use our #DRILL-PCB-5 piloted counter bore to seat the rivet heads flush.

Home > Cutlery > Knife Blades, parts, guards, hilts, & buttcaps > Rivets, Pins, Rods & brass bar stock

Cutler's Rivet, brass, single,
one male and one female part.
Use our #DRILL-PCB-5 piloted counter bore
to seat the rivet heads flush.

Part Number:	RIVET-5
Availability:
Price:	$0.99 Closeout
Order Quantity:

Each rivet is actually two pieces. The solid male half is slightly oversize, to permanently engage the hollow female half, when the two are driven home. Only moderate energy is needed to seat and join the rivets, not a heavy blow that might damage your artistic handle workmanship. Rivets are inexpensive. Order a few extra rivets!

Rivets engage over a length from 1.200" maximum to .730" minimum. The shaft requires a .150" or larger clearance hole. Order #DRILL-21 (.159" diameter).

The .310" diameter head may be set flush into the handle using our piloted counterbore #DRILL-PCB-5.

Adobe Reader required to view the files below.

page_074.pdf Last updated:4/25/2012 (179 KB)

page_078.pdf Last updated:4/25/2012 (148 KB)

drill bit, HSS, Number 21, .1590" diameter, tap drill 10-32 thread

Part Number:	DRILL-21
Availability:
Price:	$2.29
Order Quantity:

Piloted Counter Bore, 5/16" diameter, No. 21 pilot, for wood, bone, or similar materials, ideal for use with our cutler's rivets

Part Number:	DRILL-PCB-5
Availability:
Price:	$7.99
Order Quantity:

Top of Page Home > Cutlery > Knife Blades, parts, guards, hilts, & buttcaps > Rivets, Pins, Rods & brass bar stock