Flintlock Target Pistol, .40 caliber, 10-3/4" barrel, L&R flintlock, maple, iron trim, used, with loading stand and rod

Home > Guns > Flintlock guns > Flintlock pistols

Flintlock Target Pistol,
.40 caliber, 10-3/4" barrel,
L&R flintlock, maple, iron trim,
used, with loading stand and rod

Part Number:	AAW-197
Availability:

This .40 caliber flintlock Target Pistol is stocked in a beautiful piece of curly maple that has been finished a warm brown with golden undertones. The gun is built with French styling, and a man-sized grip. The bore is bright and has been well maintained. This pistol is fitted with an L&R flintlock and single set trigger. This pistol includes a loading/cleaning rod with .40 caliber jag and antler handle, and a homemade loading stand.

The .40 caliber 10-3/4" rifled bore has six lands and grooves with a fast twist for shooting patched round ball. The bore is bright, clean, and ready to shoot. The barrel is finished to a smooth even chocolate brown. The finish has a few light scratches and bright spots from normal cleaning and use. A browned iron blade front sight is dovetailed 1" behind the muzzle. A flat top rear sight is dovetailed in the rear of the barrel to maximize the sight radius, for best accuracy. The sights were painted orange for better visibility. A single bolt passes through the short straight tang to engage the trigger plate below. A small steel pin retains the barrel to the forearm. No rib, ramrod pipes, or ramrod are fitted to this gentleman's target pistol.

The L&R Bailes flintlock is properly tuned and assembled for best sparking, and the lock has been finished brown to match the barrel. The vent liner is externally coned and positioned well above the bottom of the pan, centered on the heat of the flash. If your flint longrifle suffers from that infamous slow whoosh-bang ignition delay, study the work of today's best gun makers, and position your vent well centered on the pan, high above the bottom, to serve as a window on the center of the flash. The single set trigger is double phase, it will fire the lock, set or unset. Push the trigger forward until it latches to set the trigger. The trigger adjustment screw directly behind the trigger controls the engagement in the set position.

This flint pistol will be a joy to shoot at your next shooting match. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.395" round balls, pure lead, Hornady, per 100

Part Number:	BALL-395
Availability:
Price:	$12.49
Order Quantity:

.395" round balls, pure lead, hand cast, per 100

Part Number:	BALL-395-X
Availability:
Price:	$16.69
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Ball puller, steel screw, .40 caliber brass collar, 10-32 thread

Part Number:	BP-40-10
Availability:
Price:	$3.89
Order Quantity:

Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center

Part Number:	FLUSH-RST
Availability:
Price:	$4.99
Order Quantity:

Fouling Scraper, flat face, brass, .40 caliber, 10-32 thread

Part Number:	FS-40-10
Availability:
Price:	$4.09
Order Quantity:

Jag, jagged cleaning tip, brass, .40 caliber, 3/8" rod, 10-32 thread

Part Number:	JS-40-6-10
Availability:
Price:	$4.29
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59
Order Quantity:

Nipple Wrench for Rifles & Shotguns, slotted end for #11 nipple

Part Number:	NW-120
Availability:
Price:	$9.99
Order Quantity:

Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry

Part Number:	OX-15-40-D
Availability:
Price:	$4.99
Order Quantity:

Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread Ramrods cannot be send to a P O Box.

Part Number:	RAMROD-6-10-B
Availability:
Price:	$18.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RST-I
Availability:
Price:	$4.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.

Part Number:	ST-6
Availability:
Price:	$8.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Flintlock guns > Flintlock pistols