LeMat Cavalry Revolver,
.44 caliber & .64 smoothbore, 6-3/4" barrel,
percussion, patina finished,
used, by Pietta
Part Number: AAW-397
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
Designed by a French inventor, Alexander LeMat and Confederate General Beauregard working together to create the ultimate military sidearm, this revolver was to become a favorite of many Confederate Naval and Infantry officers. The first models were made by a Philadelphia gunsmith. But due to the war, the production was moved to France where the guns were produced for the Confederate States. The revolvers were then proofed in England and shipped via the Caribbean to run the blockade to the Confederacy.

This unique single action nine shot .44 caliber revolver has added punch with a central single shot barrel of approximately .64 caliber to give a Confederate solder a advantage over his Union opponent. This Le Mat Cavalry revolver has a silvery gray patina finish. The cavalry model features a lanyard ring on the bottom of the grip, spur triggerguard and lever barrel release. The walnut grip is checkered with a oil finish.

The nine shot cylinder makes for a large percussion revolver. This revolver tips the scales at just under 3-1/2 pounds. The 6-3/4" octagon barrel is marked Col. LeMat on the top flat. A steel front sight is dovetailed behind the muzzle. The percussion hammer is notched to provide a rear sight when in the full cock position. The large .64 caliber smoothbore 4-3/4" round barrel is mounted below the barrel centered on the revolver cylinder. Remember this is a single action percussion revolver, your must manually cock the hammer for each shot. The hammer has the barrel selector switch which can be flipped to allow the center barrel to be fired. We recommend the .454" round ball, a tiny bit larger than the factory recommended .451" round ball. This larger ball gives better compression, and seems to shoot cleaner. Be sure to order a #Flask-Colt powder flask, and an #SP-020 brass measure for your flask. Use GOEX FFFg black powder, Number 11 percussion caps, and a grease or wad over each ball.

This revolver includes a brown swede leather military style flap holster for a left hand carry. The belt loop will accept a belt up to 2" wide. The muzzle end of the holster is plugged.

Used, order this revolver today! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Bullets 
.450" diameter, 200 grain, 
conical revolver bullet for .44 Army Revolvers,
cast from LEE 90382, pure lead, per 50
Bullets .450" diameter, 200 grain, conical revolver bullet for .44 Army Revolvers, cast from LEE 90382, pure lead, per 50
Part Number: BALL-450-200
Availability: In Stock
Price: $17.99
Order Quantity:
.451" round balls, pure lead, Hornady, per 100
.451" round balls, pure lead, Hornady, per 100
Part Number: BALL-451
Availability: In Stock
Price: $17.59
Order Quantity:
.454" round balls, pure lead, Hornady, per 100
.454" round balls, pure lead, Hornady, per 100
Part Number: BALL-454
Availability: In Stock
Price: $17.99
Order Quantity:
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey
Part Number: BC-CTL
Availability: In Stock
Price: $9.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.59
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $4.29
Order Quantity:
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $12.59
Order Quantity:
Powder Flask,
Colt pattern for Army & Navy revolvers,
accepts all spouts with 10-1mm threads
Powder Flask, Colt pattern for Army & Navy revolvers, accepts all spouts with 10-1mm threads
Part Number: FLASK-COLT
Availability: Out of Stock, request notification when available.
Price: $50.59
  
Button jagged cleaning tip, 16 gauge, brass, 10-32 thread
Button jagged cleaning tip, 16 gauge, brass, 10-32 thread
Part Number: JAG-16-10
Availability: In Stock
Price: $4.29
Order Quantity:
Button jagged cleaning tip, .44 caliber, brass, 10-32 thread
Button jagged cleaning tip, .44 caliber, brass, 10-32 thread
Part Number: JB-44-10
Availability: In Stock
Price: $3.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: Out of Stock, request notification when available.
Price: $8.59
  
Nipple Wrench for Revolvers,
for .36 & .44 Colt Army & Navy Models,
and other revolvers with a large nipple recess.
Nipple Wrench for Revolvers, for .36 & .44 Colt Army & Navy Models, and other revolvers with a large nipple recess.
Part Number: NW-140
Availability: In Stock
Price: $9.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $4.49
Order Quantity:
Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.
Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.
Part Number: OX-REV-44-SEAL
Availability: In Stock
Price: $9.99
Order Quantity:
.44/.45 caliber revolver Wonder Wad,
bag of 100 lubricated felt wads
.44/.45 caliber revolver Wonder Wad, bag of 100 lubricated felt wads
Part Number: OX-WAD-44-W
Availability: In Stock
Price: $7.99
Order Quantity:
Nipple, 6-.75mm metric thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, stainless steel

Cone length: 0.319" Thread journal length: 0.225" Overall length: 0.544" Diameter of base: 0.307"
Nipple, 6-.75mm metric thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, stainless steel
  • Cone length: 0.319"
  • Thread journal length: 0.225"
  • Overall length: 0.544"
  • Diameter of base: 0.307"
Part Number: PIR-LS
Availability: In Stock
Price: $4.99
Order Quantity:
Buckshot #4
.240" round balls, lead,
by Hornady, 5 pounds
Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds
Part Number: SHOT-4
Availability: In Stock
Price: $42.99
Order Quantity:
Drift Punch,
knurled brass,
for wedge keys and sights.
Drift Punch, knurled brass, for wedge keys and sights.
Part Number: TOOL-KEY-B
Availability: In Stock
Price: $5.29
Order Quantity:
18 gauge, .647" ideal for .637" bore, .125" over powder card, 1000, by Circle Fly Wads
18 gauge, .647" ideal for .637" bore, .125" over powder card, 1000, by Circle Fly Wads
Part Number: WAD-18-A
Availability: In Stock
Price: $12.69
Order Quantity:
18 gauge, .647" ideal for .637" bore, .025" over shot card, 1000, by Circle Fly Wads
18 gauge, .647" ideal for .637" bore, .025" over shot card, 1000, by Circle Fly Wads
Part Number: WAD-18-B
Availability: In Stock
Price: $12.69
Order Quantity:
18 gauge, .647" ideal for .637" bore, .500" thick fibre wad, 500, by Circle Fly Wads
18 gauge, .647" ideal for .637" bore, .500" thick fibre wad, 500, by Circle Fly Wads
Part Number: WAD-18-C
Availability: In Stock
Price: $12.69
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2025Track of the Wolf, Inc.
Accepted Credit Cards