Double Shotgun 13 gauge, 28-1/2" barrels, walnut, checkered straight grip, percussion, used, by Davide Pedersoli

Home > Guns > Percussion guns > Percussion shotguns

Double Shotgun
13 gauge, 28-1/2" barrels,
walnut, checkered straight grip, percussion,
used, by Davide Pedersoli

Part Number:	AAW-227
Availability:

This nice used double percussion shotgun was manufactured by Davide Pedersoli of Italy. The shotgun has been used, and very well maintained. Barrels are 28-1/2" long, smooth bore. Marked as a 12 gauge we find these early production shotguns have a much tighter bores than current producion and work best with 13 gauge wads and cards. The 13-1/4" and 14" trigger reach should fit today's average shooter quite well. Weight is only 5.8 pounds.

The polished brown finished barrels are 28-1/2" long and fitted with a brass bead front sight. The barrel finish has been very well maintained and has only a few small marks in the finish. Both bores are bright and have been well maintained. The bores measure 0.711" at the muzzle, and the left hand barrel has been opened up for skeet and we find it measures 0.716" diameter past the muzzle. Although the breech is marked 12 gauge we find the .711" diameter bores will work best with 13 gauge wads and cards, and either lead, or bismuth shot. Never use steel shot in this muzzleloading shotgun. The right hand breech of this shotgun is stamped Replica Arms Co. Marietta, Ohio Made In Italy. The left hand barrel has the Pedersoli mark with associated proof marks.

The straight grip is checkered, and the walnut stock is fitted with a blued steel buttplate. This wide buttplate is nearly flat, comfortably with full loads. The stock has a very few minor handling marks. The stock on this shotgun has some visible cast-off to allow the shooters eye to be positioned directly behind the line of sight. The forend is has a single key that retains the barrel. The key allows for quick disassembly for cleaning. Simply withdraw the ramrod, press out the key with firm thumb pressure, and lift the muzzle end, to dismount the barrels for easy cleaning.

Remove the two standard 1/4-28 nipples, using our #NW-120 nipple wrench, and immerse the breech end in a bucket of hot soapy water. Place a wet cleaning patch on our #Ramrod-7-10-B cleaning rod, fitted with our #Jag-12-10 cleaning jag tip. Push the air out, and draw the water in, as you pump the ramrod the full length of each barrel, a few times. Change the water, and the patch. When the patch comes out clean, you are ready to wipe the bores dry, using a patch wetted with WD-40 or other water displacing oil. Never insert a dry patch. If you used warm water, the warm barrels will dry instantly.

The locks are finished bright with scroll and floral engraving designs. This early production Pedersoli shotgun has a different engraving pattern than what is used on the currently production shotguns. The locks have aged to a light silvery gray from use. The locks are perfect inside, with strong springs, secure half-cock notches, and full cock notches that release smoothly with normal trigger finger pressure.

Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

.672" round balls, pure lead, hand cast, per 25

Part Number:	BALL-672-X
Availability:
Price:	$18.69
Order Quantity:

.678" round balls, pure lead, hand cast, per 25

Part Number:	BALL-678-X
Availability:
Price:	$18.69
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Bore brush, bronze, for .69 caliber, 10-32 thread

Part Number:	BRUSH-69-10
Availability:
Price:	$4.99
Order Quantity:

Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center

Part Number:	FLUSH-RST
Availability:
Price:	$4.99
Order Quantity:

Button jagged cleaning tip, 12 gauge, brass, 10-32 thread

Part Number:	JAG-12-10
Availability:
Price:	$4.29
Order Quantity:

Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.

Part Number:	LEE-HANDLE
Availability:
Price:	$23.59
Order Quantity:

Handles for large mold blocks, by Lyman, fits all current single and double cavity molds

Part Number:	LYMAN-H-L
Availability:
Price:	$53.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59
Order Quantity:

Shooting patches, .015" cotton, .60 - .69 caliber, per 100, dry

Part Number:	OX-15-60-D
Availability:
Price:	$4.99
Order Quantity:

Shooting patches, .018" pillow ticking, .60 - .69 caliber, per 100, dry

Part Number:	OX-18-60-D
Availability:
Price:	$5.49
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

12 gauge shotgun Premium Lubed Wad, bag of 100 lubricated felt wads

Part Number:	OX-WAD-12-W
Availability:
Price:	$14.99
Order Quantity:

Ramrod, 7/16" hickory, 36" long, brass tip, 10-32 thread, made in the USA.

Part Number:	RAMROD-7-10-B-36
Availability:
Price:	$18.99
Order Quantity:

Ramrod for 13 gauge Double Percussion Shotgun by Davide Pedersoli, 9mm stained hickory, 28-1/8" long. Brass tips, with tempered steel ball puller hidden under the end cap.

Part Number:	RAMROD-281-DP-13-H
Availability:
Price:	$32.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RST-I
Availability:
Price:	$4.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

13 gauge, .720" ideal for .710" bore, .125" over powder card, 1000, by Circle Fly Wads

Part Number:	WAD-13-A
Availability:
Price:	$12.69
Order Quantity:

13 gauge, .720" ideal for .710" bore, .025" over shot card, 1000, by Circle Fly Wads

Part Number:	WAD-13-B
Availability:
Price:	$12.69
Order Quantity:

14 gauge, .703" ideal for .693" bore, .500" thick fibre wad, 500, by Circle Fly Wads

Part Number:	WAD-14-C
Availability:
Price:	$12.69
Order Quantity:

Top of Page Home > Guns > Percussion guns > Percussion shotguns