English Bar Lock left Percussion Lock, with early flat hammer, by L&R

Home > Gun Parts > Locks > Locks

English Bar Lock left Percussion Lock, with early flat hammer, by L&R

Part Number:	LOCK-LR-600
Availability:
Price:	$160.00
Order Quantity:

English Bar left Percussion Lock, with early flat hammer
The English “bar” lock is so-called because it uses a “drip bar” soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it.

Most better London & Birmingham makers used “bar” locks, as did such famous American makers as H. E. Dimick of St. Louis. The bar lock was used on half stock rifles. When used in pairs on double guns, barrels overhang the plates, to eliminate the filler bars.

We offer the right drip bar only. Matching right and left bars can be made from two right bars.

Other features include a fly, and mainspring link with integral pins, which pivots to lift out of the tumbler, a fine English feature.
The hammer has a long 1.745” throw for use with barrels from
15/16” up to 1-1/4” at breech. Our left “bar” locks exactly match our right locks. In lieu of a front bolt, a lug can be added inside the plate, to hook under a hidden wood screw head, set in the lock mortise.

Since the internal parts are used in other L&R locks, the other styles of hammers may be fitted to these locks. The Hawken, Leman, and English hammers are misnomers, as all these are really English designs. We use these names for clarity, since these hammer shapes are well known from those locks. Our matching hammers, locks and parts may be used to repair or replicate old rifles and shotguns.

This lock exactly matches our right hand English bar lock.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.

Adobe Reader required to view the files below.

page_187.pdf Last updated:4/25/2012 (103 KB)

Bridle screw, 6-40 thread

Part Number:	LOCK-LR-100-BX
Availability:
Price:	$3.29
Order Quantity:

Fly detent, steel, tempered, with hole for pivot

Part Number:	LOCK-LR-100-FL
Availability:
Price:	$5.00
Order Quantity:

Stirrup link, wax cast steel, tempered, integral pins

Part Number:	LOCK-LR-100-LI
Availability:
Price:	$13.50
Order Quantity:

Sear spring screw, 6-40 thread

Part Number:	LOCK-LR-100-SSX
Availability:
Price:	$3.29
Order Quantity:

Sear screw, .59" length, 6-40 thread

Part Number:	LOCK-LR-100-SX
Availability:
Price:	$3.29
Order Quantity:

Tumbler screw, .400" head diameter, 6-40 thread

Part Number:	LOCK-LR-100-TX
Availability:
Price:	$5.25
Order Quantity:

bridle, left, wax cast steel, use 6-40 screws

Part Number:	LOCK-LR-200-BR
Availability:
Price:	$24.00
Order Quantity:

Mainspring, left, tempered steel, tempered

Part Number:	LOCK-LR-200-MS
Availability:
Price:	$36.00
Order Quantity:

sear, left, wax cast steel, tempered, use 6-40 screw

Part Number:	LOCK-LR-200-SE
Availability:
Price:	$24.00
Order Quantity:

sear spring, left, die formed steel, tempered

Part Number:	LOCK-LR-200-SS
Availability:
Price:	$6.00
Order Quantity:

tumbler, left, wax cast steel, tempered, tapped 6-40

Part Number:	LOCK-LR-200-TU
Availability:
Price:	$34.50
Order Quantity:

hammer, left, wax cast steel, 1.745" throw

Part Number:	LOCK-LR-600-HA
Availability:
Price:	$25.50
Order Quantity:

Lock plate, wax cast steel, 5.17" x 1.06", tapped 6-40

Part Number:	LOCK-LR-600-PL
Availability:
Price:	$45.00
Order Quantity:

Mainspring Vise, to safely compress a mainspring

Part Number:	TOOL-VISE
Availability:
Price:	$22.99
Order Quantity:

Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.

Part Number:	TOOL-VISE-DX
Availability:
Price:	$39.99
Order Quantity:

Top of Page Home > Gun Parts > Locks > Locks