English Durs Egg - London left Percussion Conversion Lock, by L&R

Home > Gun Parts > Locks > Durs Egg - London, percussion, right & left hand lock, by L&R Lock Co.

English Durs Egg - London left Percussion Conversion Lock, by L&R

Part Number:	LOCK-LR-3500
Availability:
Price:	$160.00
Order Quantity:

Durs Egg - London left Percussion Conversion Lock
Best quality London made flint locks were often converted to percussion, during the 1825 - 1840 transition period. This nice percussion lock has the plate style of an earlier flint lock, with a notch for a 1/2" powder drum and nipple.

A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4” to 1-1/8” octagon at the breech.

Notice the “cut away” tumbler and “swing out” link, which greatly simplify lock disassembly. These are fine English innovations. This tumbler has a lower arm, made to catch the mainspring if the tumbler arm or link should break while being cocked. But even if this “weakest link” has failed, this fine lock will fire one last shot. You can depend on this nice lock, in good weather or bad, to spark well. English rifles fitted with such a fine lock invariably have a flash hole liner fitted, for fastest ignition. Refer to our reprint of Henry Nock’s Patent Breech patent drawings for details of original flash hole construction.

The lock plate is polished bright inside. Exterior parts are grit blasted to a matte gray.

This lock exactly matches our right hand Durs Eggpercussion lock.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.

Adobe Reader required to view the files below.

page_173.pdf Last updated:4/25/2012 (104 KB)

Powder drum, 7/16" diameter, 5/16-24 thread, not drilled for nipple

Part Number:	DRUM-7-5-F-N
Availability:
Price:	$4.59
Order Quantity:

Fly detent, steel, tempered, with hole for pivot

Part Number:	LOCK-LR-100-FL
Availability:
Price:	$5.00
Order Quantity:

Stirrup link, wax cast steel, tempered, integral pins

Part Number:	LOCK-LR-100-LI
Availability:
Price:	$13.50
Order Quantity:

Sear spring screw, 6-40 thread

Part Number:	LOCK-LR-100-SSX
Availability:
Price:	$3.29
Order Quantity:

Tumbler screw, .400" head diameter, 6-40 thread

Part Number:	LOCK-LR-100-TX
Availability:
Price:	$5.25
Order Quantity:

sear spring, left, die formed steel, tempered

Part Number:	LOCK-LR-200-SS
Availability:
Price:	$6.00
Order Quantity:

Bridle & sear screw, .625" length, 6-40 thread

Part Number:	LOCK-LR-1100-BX
Availability:
Price:	$3.29
Order Quantity:

sear, left, wax cast steel, tempered use 6-40 screw

Part Number:	LOCK-LR-1800-SE
Availability:
Price:	$24.00
Order Quantity:

tumbler, left, wax cast steel, tempered, cut for fly, tapped 6-40

Part Number:	LOCK-LR-1800-TU
Availability:
Price:	$34.50
Order Quantity:

bridle, left, wax cast steel, use 6-40 screws

Part Number:	LOCK-LR-3100-BR
Availability:
Price:	$24.00
Order Quantity:

Mainspring, left, tempered steel, tempered

Part Number:	LOCK-LR-3100-MS
Availability:
Price:	$36.00
Order Quantity:

hammer, left, wax cast steel, 1.625" throw, percussion

Part Number:	LOCK-LR-3500-HA
Availability:
Price:	$25.50
Order Quantity:

plate, left, wax cast steel, .94" x 5.1", cut for 7/16" drum

Part Number:	LOCK-LR-3500-PL
Availability:
Price:	$45.00 Closeout
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Mainspring Vise, to safely compress a mainspring

Part Number:	TOOL-VISE
Availability:
Price:	$22.99
Order Quantity:

Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.

Part Number:	TOOL-VISE-DX
Availability:
Price:	$39.99
Order Quantity:

Top of Page Home > Gun Parts > Locks > Durs Egg - London, percussion, right & left hand lock, by L&R Lock Co.