1861 Enfield Musketoon,
.58 caliber, 24" barrel,
percussion, walnut, brass,
bayonet, sling, used, made in England by Parker Hale
Part Number: AAW-202
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This Enfield Musketoon, with 24" barrel, is dated 1861 on the lock plate. Made for the caliber .577 hollow base Minie bullet that allowed quick reloading, achieved fine accuracy, and much longer range than the round ball muskets of an earlier generation. The rear sight is calibrated and marked in 100 yard increments, up to 600 yards. Enfield muskets were imported and issued by both the North and the South. The Confederacy purchased Enfield muskets from neutral England, and brought them into the South, at great risk, aboard the blockade runners. Unlike Springfield muskets, this Enfield musketoon is trimmed in brass, and stocked in close grain English walnut.

  • Includes nipple protector and chain
  • Canvas sling
  • Antique bayonet in well used condition
This is an early Parker Hale Musketoon, made in Birmingham, England, with English proof marks. Later production was moved to Italy. This Musketoon is offered in used condition with a bright well maintained bore. The cartouche is clearly visible in the buttstock. The original nipple protector and chain are included. Trigger reach is 14" to fit today's average size shooter. Weight is 7.3 pounds.

The .577 caliber tapered round 24" barrel is rifled with five wide lands and narrow grooves. The bore is bright, clean, and ready to shoot. The polished and blued barrel is tapered round, with a distinct flat at the breech, which makes a smooth transition to the tang. The top of the barrel is marked with a crown over BP, indicating a black powder proof at Birmingham. The tang is faintly stamped with the same proof marks. The top of the barrel is marked PARKER-HALE LTD, BIRMINGHAM, ENGLAND. The left side of the barrel is stamped with the serial number near the breech. The blue finish is in excellent condition. The correct Enfield ladder style military sight is fitted ahead of the breech. The front sight is the factory original steel blade. A bayonet lug is mounted to the right side of the barrel 4-1/4" behind the muzzle.

The brass buttplate, triggerguard, and muzzle cap are retained with blued steel screws, as original. The two barrel bands are polished and blued. Sling swivels are mounted for a military sling, no sling is included. Stocked in English walnut, with relatively straight grain, the stock is finished to a light brown with satin sheen. Notice the circular cartouche, the maker's inspection mark, stamped in the center of the buttstock, exactly as found on original Enfield muskets. The steel ramrod has 12-28 male threads for attaching cleaning accessories. Two brass sideplate washers are inlet flush into the stock, and counter bored to accept the two lock bolts.

The color case hardened lock has the classic Enfield percussion hammer. The hammer is nicely engraved with a border, and checkered at the thumb spur. The color case hardened finish on the lock plate has faded toward the front. The lock plate is stamped 1861 ENFIELD, and the tail is stamped with a crown (indicating ownership by the Crown), and the initials PH. This replica Enfield rifled musket is fitted with a Ampco 5/16-18 threaded Enfield musket nipple. We can supply a similar 5/16-18 threaded nipple for standard No. 11 caps or musket caps. Order our #NW-100 nipple wrench. The tiny blued steel stud ahead of the triggerguard is a lanyard loop. The factory chain with nipple protector are attached.

This Enfield Carbine will be appreciated by a Civil War reenactor. Offered in excellent used condition with a bright bore, this musket is ready for your next Civil War reenactment. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .57 caliber, Minie, Enfield .577", Lyman 577-611, 530 grain, pure lead, hollow base, per 25
bullets, .57 caliber, Minie, Enfield .577", Lyman 577-611, 530 grain, pure lead, hollow base, per 25
Part Number: BALL-57-MINIE
Availability: In Stock
Price: $24.09
Order Quantity:
bullets, .58 caliber, Minie, Springfield .575", Lyman 575-213, 510 grain, pure lead, hollow base, per 25
bullets, .58 caliber, Minie, Springfield .575", Lyman 575-213, 510 grain, pure lead, hollow base, per 25
Part Number: BALL-58-MINIE
Availability: In Stock
Price: $22.99
Order Quantity:
.570" round balls, pure lead, Hornady, per 50
.570" round balls, pure lead, Hornady, per 50
Part Number: BALL-570
Availability: In Stock
Price: $12.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.59
Order Quantity:
Ball puller, steel screw, .58 caliber brass collar, 10-32 thread
Ball puller, steel screw, .58 caliber brass collar, 10-32 thread
Part Number: BP-58-10
Availability: In Stock
Price: $4.29
Order Quantity:
Bore brush, bronze, for .58 caliber, 10-32 thread
Bore brush, bronze, for .58 caliber, 10-32 thread
Part Number: BRUSH-58-10
Availability: In Stock
Price: $4.29
Order Quantity:
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, hardened steel, 1/4" square lug,

Cone length: 0.475" Thread journal length: 0.275" Overall length: 0.750" Diameter of base: 0.370"
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, hardened steel, 1/4" square lug,
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMS-I
Availability: In Stock
Price: $7.99
Order Quantity:
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel

Cone length: 0.475" Thread journal length: 0.275" Overall length: 0.750" Diameter of base: 0.370"
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMS-S
Availability: Item is currently sold out.
Price: $7.99
Order Quantity:
  
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel, 1/4" square lug

Cone length: 0.475" Thread journal length: 0.275" Overall length: 0.750" Diameter of base: 0.370"
Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, musket cap, stainless steel, 1/4" square lug
  • Cone length: 0.475"
  • Thread journal length: 0.275"
  • Overall length: 0.750"
  • Diameter of base: 0.370"
Part Number: EMS-SQ-S
Availability: In Stock
Price: $7.99
Order Quantity:
Powder Flask,
U. S. Model 1855
Peace & Friendship,
brass, with lanyard rings
accepts 10-1mm threaded spouts
Powder Flask, U. S. Model 1855 Peace & Friendship, brass, with lanyard rings accepts 10-1mm threaded spouts
Part Number: FLASK-PEACE
Availability: In Stock
Price: $54.99
Order Quantity:
Flush Nipple,
5/16-18 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits British Enfield and similar muskets
Flush Nipple, 5/16-18 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits British Enfield and similar muskets
Part Number: FLUSH-EMS
Availability: In Stock
Price: $8.99
Order Quantity:
Fouling Scraper, flat face, brass, .58 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .58 caliber, 10-32 thread
Part Number: FS-58-10
Availability: In Stock
Price: $4.79
Order Quantity:
Jag, jagged cleaning tip, brass, .58 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .58 caliber, 7/16" rod, 10-32 thread
Part Number: JS-58-7-10
Availability: In Stock
Price: $5.09
Order Quantity:
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder
Part Number: LUBE-SPG
Availability: In Stock
Price: $5.19
Order Quantity:
Nipple Wrench for Muskets,
with slotted socket, for square or flat side nipples
Nipple Wrench for Muskets, with slotted socket, for square or flat side nipples
Part Number: NW-100
Availability: In Stock
Price: $9.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $4.99
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $5.79
Order Quantity:
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-7-10-B
Availability: In Stock
Price: $19.99
Order Quantity:
Adapter for military rod, 
Japanese musket or Colt 1861 Signature Series Special Musket,
female 12-24 to 10-32 female
Adapter for military rod, Japanese musket or Colt 1861 Signature Series Special Musket, female 12-24 to 10-32 female
Part Number: SA-10-JAPAN
Availability: In Stock
Price: $2.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: Out of Stock, request notification when available.
Price: $6.89
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards