Ketland late conversion cap lock, by R. E. Davis

Home > Gun Parts > Locks > Locks

Ketland late conversion cap lock, by R. E. Davis

Part Number:	LOCK-LK-C
Availability:
Price:	$159.99
Order Quantity:

Build an early percussion longrifle, or converted flint Tennessee or late longrifle using our late Ketland cap lock.

This “conversion" lock interchanges with our late Ketland flint lock. If you are planning a gun with interchangeable ignition, we recommend fitting the percussion lock first, to insure a good fit of the drum to the lock plate. The plate must support the drum.

Notice the rounded corner ahead of the drum notch, instantly identifying this as a flint conversion lock. File it square to update it to a later style. Use our 1/2" diameter #Drum-8-5-F-N and 1/4 - 28 #RST-S nipple. The deep hammer cup protects the shooter against cap spray, and the cast-in checkering provides a good grip for your thumb. Most commonly mounted with only one lock bolt, this plate is long enough to allow the use of two lock bolts, if desired.

Made in the U.S.A., by R. E. Davis Co., this is a good choice for a percussion longrifle or target pistol. We stock every spare part to fit this late Ketland percussion conversion lock.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.

Adobe Reader required to view the files below.

page_177.pdf Last updated:4/25/2012 (105 KB)

Powder drum, 1/2" diameter, 5/16-24 thread, not drilled for nipple

Part Number:	DRUM-8-5-F-N
Availability:
Price:	$4.59
Order Quantity:

hammer, 1.4" throw, checkered

Part Number:	LOCK-LK-C-HA
Availability:
Price:	$17.99
Order Quantity:

lock plate, 4.8 x 1.0", drilled & tapped

Part Number:	LOCK-LK-C-PL
Availability:
Price:	$18.99
Order Quantity:

bridle, drilled for three screws

Part Number:	LOCK-LK-F-BR
Availability:
Price:	$12.00
Order Quantity:

bridle & sear screw, 5-40 thread, use three

Part Number:	LOCK-LK-F-BX
Availability:
Price:	$2.29
Order Quantity:

fly detent, hardened & tempered

Part Number:	LOCK-LK-F-FL
Availability:
Price:	$11.99
Order Quantity:

stirrup link, tempered

Part Number:	LOCK-LK-F-LI
Availability:
Price:	$11.99
Order Quantity:

mainspring, tempered, slot for link

Part Number:	LOCK-LK-F-MS
Availability:
Price:	$30.00
Order Quantity:

sear, tempered, use 5-40 screw

Part Number:	LOCK-LK-F-SE
Availability:
Price:	$21.99
Order Quantity:

Sear spring screw, .47" long, 5-40 thread

Part Number:	LOCK-LK-F-SSX
Availability:
Price:	$2.29
Order Quantity:

tumbler, tapped & hardened, cut for fly

Part Number:	LOCK-LK-F-TU
Availability:
Price:	$32.99
Order Quantity:

tumbler screw, 5-40 thread, .437" diameter head

Part Number:	LOCK-LK-F-TX
Availability:
Price:	$4.99
Order Quantity:

Sear spring, die formed steel, tempered

Part Number:	LOCK-SS-FK-SS
Availability:
Price:	$15.00
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.

Part Number:	TOOL-VISE-DX
Availability:
Price:	$39.99
Order Quantity:

Top of Page Home > Gun Parts > Locks > Locks